Plasma Cutting

Cutting Process

Gas Mixers

MANÁSOLDA®

Plasma cutting is a process that cuts through electrically conductive materials such as stainless steel, carbon steel, aluminum and others. The search for this type of process grows every day, because it allows standardization and cutting quality. The gases used for plasma cutting are Nitrogen, Compressed Air, Oxygen, Argon and Hydrogen. The guarantee of the mixture of these gases in a correct way and, in exact concentrations, is essential in this process.

For precision, safety and productivity in the cutting processes the quality of the gas/mix used is of extreme importance. This result is only achieved with exact gas mixtures that allow repeatability throughout the process. Our mixers promote the ideal mixture according to the demand of each process, offering models with fixed or variable output options.

Gas mixer designed and manufactured for the welding process, which allows mixing between 02 gases, with flow rate and outlet pressure control. From 0 to 100% content adjustable gas mixing output.

Gas mixer designed and manufactured for the welding process, which allows mixing between 02 gases, and therefore, capable of generating two different and independent gas mixtures. Factory-set (non-adjustable) gas mixing outputs.

Gas mixer designed and manufactured for the welding process, which allows mixing between 02 gases, and therefore, capable of generating four different and independent gas mixtures. Factory-set (non-adjustable) gas mixing outputs.

Compact gas mixer designed and manufactured for the welding process, which allows mixing between 02 gases, with flow rate and outlet pressure control. From 0 to 100% content adjustable gas mixing output. Requires cylinder/first stage pressure regulators for both input gases.

Gas mixer designed and manufactured for the welding process, which allows mixing between 02 gases directly from the cylinders, with flow rate and outlet pressure control. From 0 to 100% content adjustable gas mixing output. Both input gases should be connected directly to the gas mixer. No need to use cylinder/first stage pressure regulator.

Compact gas mixer designed and manufactured for the welding process, which allows mixing between 02 gases, with outlet flow rate control. From 0 to 100% content adjustable gas mixing output. Requires cylinder/first stage pressure regulators for both input gases.

Compact gas mixer designed and manufactured for the welding process, which allows mixing between 03 gases, with outlet flow rate control. From 0 to 100% content adjustable gas mixing output. Requires cylinder/first stage pressure regulators for both input gases.